atem: switching¶
Generated from the command table (internal/table); do not edit. After
changing a table, run go generate ./cmd/bmdctl.
What is on program, preview and the aux outputs: program, preview, cut, auto, the T-bar, fade to black, undo.
COMMANDS.md says how to read an entry, and lists the flags every command takes and the built-in commands.
bmdctl atem auto¶
Run the M/E's transition with its current style and rate.
bmdctl auto
bmdctl auto --me 2
No echo.
| argument | value | ||
|---|---|---|---|
--me |
uint, 1-256, counted from 1 | default 1 | M/E |
bmdctl atem aux <aux> <source>¶
Route a source to an aux output.
bmdctl aux 1 pgm
bmdctl aux 2 cam4
bmdctl aux 3 cf1
Echo: AuxS:<aux>.
| argument | value | ||
|---|---|---|---|
<aux> |
uint, 1-256, counted from 1 | required | aux output |
<source> |
source, 0-65535 | required | source id or input name |
bmdctl atem cut¶
Cut program and preview.
bmdctl cut
bmdctl cut --me 2
No echo.
| argument | value | ||
|---|---|---|---|
--me |
uint, 1-256, counted from 1 | default 1 | M/E |
bmdctl atem ftb enable <enabled>¶
Make fade to black available or not (always M/E 1; see docs/PORTING.md).
bmdctl ftb enable on
Echo: FEna.
| argument | value | ||
|---|---|---|---|
<enabled> |
bool | required | available |
bmdctl atem ftb rate <rate>¶
Set the fade-to-black rate.
bmdctl ftb rate 1:00
Echo: FtbP:<me>.
| argument | value | ||
|---|---|---|---|
<rate> |
rate, 0-255, frames, or seconds:frames at the display rate | required | rate |
--me |
uint, 1-256, counted from 1 | default 1 | M/E |
bmdctl atem ftb toggle¶
Fade to black, or back.
bmdctl ftb toggle
No echo.
| argument | value | ||
|---|---|---|---|
--me |
uint, 1-256, counted from 1 | default 1 | M/E |
bmdctl atem preview <source>¶
Put a source on an M/E's preview bus.
bmdctl preview cam3
bmdctl preview col1 --me 2
Echo: PrvI:<me>.
| argument | value | ||
|---|---|---|---|
<source> |
source, 0-65535 | required | source id or input name |
--me |
uint, 1-256, counted from 1 | default 1 | M/E |
bmdctl atem program <source>¶
Put a source on an M/E's program bus.
bmdctl program cam2
bmdctl program "Stage Left"
bmdctl program mp1 --me 2
Echo: PrgI:<me>.
| argument | value | ||
|---|---|---|---|
<source> |
source, 0-65535 | required | source id or input name |
--me |
uint, 1-256, counted from 1 | default 1 | M/E |
bmdctl atem tbar <position>¶
Move the T-bar.
bmdctl tbar 5000
bmdctl tbar 10000 --me 2
Unverified. Echo: TrPs:<me>.
| argument | value | ||
|---|---|---|---|
<position> |
int, 0-10000, clamped | required | T-bar position |
--me |
uint, 1-256, counted from 1 | default 1 | M/E |
bmdctl atem undo¶
Undo the last program, preview, cut, auto, aux, keyer or DSK on-air change made from this machine.
bmdctl undo