atem: sources

Generated from the command table (internal/table); do not edit. After changing a table, run go generate ./cmd/bmdctl.

Inputs and sources: the list, renames, colour generators, camera control, HyperDeck slots.

COMMANDS.md says how to read an entry, and lists the flags every command takes and the built-in commands.

bmdctl atem camera <destination> <category> <parameter>

Send one Blackmagic camera control parameter.

bmdctl camera 1 0 3 --type fixed16 --data 0.5
bmdctl camera 2 1 2 --type int16 --data 5600,0
bmdctl camera 1 0 0 --relative --type fixed16 --data 0.05

Unverified. Echo: CCdP:<destination>:<category>:<parameter>.

argument	value
<destination>	uint, 0-255	required	camera; 255 for all
<category>	uint, 0-255	required	category
<parameter>	uint, 0-255	required	parameter
--relative	bool	default false	add to the current value
--type	enum, 0-255: bool=0 int8=1 int16=2 int32=3 int64=4 string=5 fixed16=128	default bool	data type
--data	list	optional	comma-separated values of the data type

bmdctl atem color <generator>

Set a colour generator.

bmdctl color 1 --hue 210 --saturation 80 --luma 40
bmdctl color 2 --sat 0 --luma 100

Give at least one flag. Echo: ColV:<generator>.

argument	value
<generator>	uint, 1-2, counted from 1	required	colour generator
--hue	float, degrees, not clamped	optional	hue
--saturation	float, %, clamped to 0-100	optional	saturation
--luma	float, %, clamped to 0-100	optional	luma

bmdctl atem hyperdeck-slot <slot>

Bind a HyperDeck slot to an address and an input.

bmdctl hyperdeck-slot 1 --address 192.168.10.50 --input cam4
bmdctl hyperdeck-slot 2 --address 0.0.0.0

Give at least one flag. Echo: RXMS:<slot>.

argument	value
<slot>	uint, 1-10, counted from 1	required	HyperDeck slot
--address	string	optional	deck IPv4 address; 0.0.0.0 clears the slot
--input	source, 0-65535	optional	switcher input the deck feeds

bmdctl atem input rename <source>

Rename an input.

bmdctl input rename cam1 --long-name "Stage Left" --short-name STGL
bmdctl input rename 2 --short-name WIDE

Give at least one flag. Echo: InPr:<source>.

argument	value
<source>	source, 0-65535	required	source id or input name
--long-name	string, up to 20 bytes	optional	long name
--short-name	string, up to 4 bytes	optional	short name
--port-type	uint, 0-65535	optional	external port type (no atemwire operation sets it)

bmdctl atem inputs

List the switcher's sources, one per line: id, short name, long name and port type.

bmdctl inputs
bmdctl inputs --all

argument	value
--all	bool	default false	at a terminal, the outputs, key masks and media player keys too (a pipe and --json always have them)